Aerobics PaceMaster Owner's Manual download pdf (Page 29)

TROUBLESHOOTING

CAUTION: Unplug your treadmill before attempting any cleaning, maintenance, or service.

Is the magnetic key inserted into the control panel?

Is treadmill plugged into the wall outlet?

Check the household circuit breaker to see if it is tripped. The treadmill will

not operate if plugged into a GFCI (Ground Fault Current Interrupt) outlet.

Check the treadmill circuit breaker (See Figure 8, page 31). If the circuit

breaker is tripped, push reset button back in to reset.

Make sure the wiring harness is plugged into the power supply (See Step 2,

page 8).

No Power

Check both the black power cord and the black wiring harness for damage.

Electronic Error Codes

Your self-diagnostic PaceMaster treadmill has built in sensors that will determine the precise reason for a problem. If the onboard

computer detects a problem, an error code will be displayed. If an error code appears during operation of your treadmill, do the following:

• Make a note of the error code number (see next page for example).

• Obtain your serial number, located on the front of the treadmill approximately 10-12 inches to the left of the power cord.

• Write down which mode of operation you were using, the speed and incline that were set and if you were pressing any

buttons at the time.

• Contact the PaceMaster dealer where you purchased your treadmill. If you have moved or need the name of the local

dealer, visit our website at www.pacemaster.com and choose the dealer locater to find this information.

Example Error Code

If the onboard computer detects a problem, an error code will be displayed. (Example - Err 149)

“Err” will display in the Time Window, “149” will display in Results Window (see example below).

WARM UP

COOL DOWN

SELECT

Err

149

1 2 ... 24 25 26 27 28 29 30 31 32 33 34

No comments

Aerobics PaceMaster Owner's Manual Page 29